ALL
VW T3
VW T3
VW MK1
VW MK1
VW MK2
VW MK2
VW MK4
VW MK4
VW MK5
VW MK5
VW MK7
VW MK7
VW MK8
VW MK8

Custom Plastic Parts: Vacuum Forming & 3D Printing

Bring us an old part, a drawing or just an idea. We'll scan, design, 3D print and vacuum form it — and ship you a single piece or a finished batch.

Start a project

Injection molding pays off when you need tens of thousands of parts. Below that, the tooling cost usually kills the project before it starts. Vacuum forming works differently: a heated plastic sheet is pulled tight over a mold, so one form can turn out a whole run of identical parts without a five-figure tooling bill. It's the same process behind most of the parts in our own catalog.

From idea to finished batch

  1. 1
    3D scanning

    If you have a physical sample, we 3D scan it to capture its exact shape. No sample? We go straight to modeling.

  2. 2
    CAD modeling

    We build a clean, editable model: fix wear and damage, improve fitment, add mounting points and prepare the geometry for forming — draft angles, radii, trim lines.

  3. 3
    3D-printed prototype

    Before we make a mold, we print a prototype on a 3D printer so you can check the fit and the look in your hands — and on the car. Printing is fast, so changes at this stage are quick and cheap.

  4. 4
    Mold

    Once you approve the prototype, we mill the forming mold on a CNC machine and finish it by hand. It belongs to you.

  5. 5
    Vacuum forming

    Parts are formed in the material, thickness and texture you choose.

  6. 6
    Trimming and finishing

    Every part is trimmed, the edges are cleaned up and the holes are drilled.

  7. 7
    Inspection and shipping

    Each part is checked against the approved prototype, then packed and shipped anywhere in the US or Canada.

Molds, milled and hand-finished in our shop

Start at any stage

You don't have to order the whole cycle. Already have a STEP file? We start from the prototype. Have a mold that works? We'll just run the parts. Only need a production-ready model for your own manufacturer? We'll stop after CAD and hand over the files.

3D design and printing

Not every part needs a mold. For one-offs, tricky shapes and very small quantities, we design the part from scratch and 3D print it as the finished piece — brackets, clips, mounts, caps, adapters, covers and more.

Printing is a service on its own, too: send us a ready model and we'll print it, or describe what you need and we'll design it first.

Materials and finishes

  • ABS — tough and impact-resistant, holds its shape under heat. Our go-to for exterior trim, engine bay covers and panels.
  • Polystyrene (HIPS) — light, with a smooth finish and a lower price. Great for interior pieces and inserts.
  • Other sheet plastics — if you have a specific material in mind, just name it in your request.
Up to 5 mm
sheet thickness (about 3/16″)
Smooth or textured
match the original or pick your look
Large parts welcome
send dimensions and we'll confirm

Parts we've made

Who it's for

  • Restorers and car clubs who need a run of parts that haven't been made in decades.
  • Shops and small brands launching their own product without sinking money into tooling.
  • Anyone who needs covers, trays, enclosures, panels or displays — the process works just as well outside the automotive world.

Batch size and pricing

Very small runs are our specialty — a handful of parts is a perfectly normal order. Pricing is agreed per project: the cost of modeling and the mold is spread across the batch, so the price per piece drops as the quantity grows.

Send us your task, and we'll come back with a quote as quickly as we can.

What we need for a quote

  • Photos or drawings of the part, with a tape measure or ruler in the frame
  • Approximate dimensions
  • Quantity
  • Material, thickness and texture, if you already know them
  • Where the part will live: interior, engine bay or outdoors
  • Your target date

FAQ

What's the minimum order?
There's no fixed minimum. Very small runs are what we do best — a handful of parts is a perfectly normal order.
Can you just 3D print a part for me?
Yes. Send us a ready file, or describe the part and we'll design it for you. We print single pieces and small runs — no mold needed.
How long does a project take?
It depends on the part and the stages you need. Prototypes are 3D printed, so the first piece gets to you fast. You'll get an exact schedule together with the quote.
Who owns the design and the mold?
You do. The CAD files and the mold made for your project belong to you.
Can I order more later?
Yes. Since the mold already exists, a repeat order goes straight to forming.
Can you match the texture of the original part?
We work with smooth sheet and a range of textures. Send a close-up photo of the original surface, and we'll suggest the closest match.

Other services

Request a quote

Got a part that's impossible to find? Let's make a batch of new ones.

Tell us about your project. The more details you share, the more accurate the quote — and we reply as quickly as we can.

Have photos or drawings? Email them to wcomarketusa@gmail.com with your name in the subject line.